66
Rigel-PJ1nx Training
Slide 66
Writing Data to New Boards
Copying Data from the Old Main Board to a PC - 2
Click ‘Adjust Start’.
Click ‘Data’.
Select ‘All’, then click ‘Read’.
You will be asked to input a file name. The data from the old main
board will be stored here.
Click ‘OK’ when ‘It completed’ appears.
Click ‘Adjust End’.
Note: If you now wish to do the same work on another projector,
you must still click ‘Adjust End’, or there will be an error.
No additional notes
