Ricoh Remote Communication Gate S, Руководство оператора, Страница: 81 / 134

Operating the Device Registration Wizard
65
6
❖
IP address search range
Enter to set the managing image I/O devices connected to network. Enter
the IP address to start and finish in “x.x.x.x” format (“x” stands for any
number between 0 to 255).
Note
❒
The image I/O devices connected by RS-485 are searched regardless of
the entered IP address range.
❒
If the IP address of the managing image I/O devices connected to the
network is already defined, enter the IP address on both starting (the
left side box) and finishing (the right side box) IP address box. This will
shorten the search time.
❒
Enter larger values for finishing the IP address (the right side box) than
the starting (the left side box) IP address. An error will occur if you enter
a larger value for starting the IP address than finishing the IP address.
❒
If you set “0.0.0.0” for the finishing address, the range of IP address on
the line will not be searched.
❒
An error will occur if you set values other than “0.0.0.0” to the finishing
IP address, and “0.0.0.0” for the starting IP address.
❖
SNMP community name
Enter SNMP community name within thirty characters to search for SNMP
correspondent devices with
[ IP address search range ] .
Note
❒
Leave the item blank if the managing devices are only HTTP correspon-
dent devices and RS-485 connected devices.
❒
The SNMP community name works as a “password” when the equip-
ment tries to access the SNMP correspondent devices. See the operating
instructions for each device for details.
❒
Input
[ SNMP community name ]
in the order of higher usage frequency.
❒
Remove [ SNMP community name ] you do not use.
Limitation
❒
You can set 10 search ranges at a time. To search for more than 10 ranges,
click
[ Additional Search ] in
E
and repeat the searching and selecting. Click
[ Selected Device List ] to show devices which have already been searched
and selected.
❒
The equipment can manage a maximum of 100 devices.