Ricoh Remote Communication Gate S Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 134

Ricoh Remote Communication Gate S Скачать руководство пользователя страница 27

11

2. Setup and Connection

This chapter will describe how to setup and connect the equipment to the net-
work.

Checking the Setup Environment

R

WARNING:

R

CAUTION:

Place the equipment on a level and vibration free surface.
Place the equipment on a location that guarantees a space of 0.4inch (1cm) or
more from the front/back/left/right sides of the equipment.

Important

❒

Do not locate the equipment where it is exposed to:
• direct sunlight
• air conditioner, heater, or humidifier emission
• electronic/magnetic interference from radios, televisions, or other electri-

cal equipment

• Areas excessively cold, hot, or humid
• extreme heat, cold, or humidity

❒

Locate this equipment in a secure environment such as an enclosed office.

❒

This equipment supports manufacturer original I/O devices only.

❒

Connect this equipment and the image I/O devices to a responsibly adminis-
trated network that is protected by a firewall or a similar Internet security/vi-
rus protection facility.

❒

Choose reliable persons as the administrator and registrant. The administra-
tor is responsible for management and operation of the equipment; the regis-
trant is responsible for registering the equipment on the Communication
Server. Both must read the "Operating Instructions" and "Setup Guide" care-
fully.

•

Confirm that the wall outlet is near the equipment and easily accessi-
ble so as to be unplugged quickly in an emergency.

•

Keep the equipment away from humidity and dust. Otherwise a fire or an
electric shock might occur.

•

Do not place the equipment on an unstable or tilted surface. If it topples
over, an injury might occur.

«
...
25
26
27
28
29
...
»

Содержание Remote Communication Gate S







































































































































Отзывы:

Нет отзывов