Ricoh Remote Communication Gate S, Руководство оператора, Страница: 69 / 134

When Registering with the Internet encryption communication (HTTPS) Method
53
4
J
Click [ Next ] .
When using Always connected on Type BN1
The [ RC Gate Registration Wizard: HTTP Proxy Settings ] screen will appear if you
are using your network environment to access the Communication Server.
A
If your environment uses a proxy server, set “Enable” for [ Proxy server ]
and enter from [ Proxy IP address ] to [ Proxy password ] . If your environment
does not use a proxy server, set “Disable” for [ Proxy server ] .
When using Dial-up on Type BM1
The [ RC Gate Registration Wizard: Dial-up Settings ] screen will appear if you are
using a modem board installed on Remote Communication Gate Type BM1.
A
Enter [ Access point ] , [ RC Gate phone No. ] and [ Line connection ] .
❖
Access point
Click
[
T
]
and select your country or region from the list.
❖
RC Gate phone No.
Enter the telephone number for the equipment, starting with your coun-
try code number. You can enter the values using numbers, - #, and *. En-
ter the telephone number in the following format: (country code)-(area
code)-(telephone number)
Example: 1-213-123-4567
Note
❒
Enter the telephone number of the equipment, not of the access point.
This number is required to make calls from the communication serv-
er to the equipment.