Ricoh Remote Communication Gate S, Руководство оператора, Страница: 70 / 134

Registering the Equipment
54
4
❖
Line connection
Select “RC Gate and fax shared line” if the equipment shares the tele-
phone line with a FAX. Select “RC Gate exclusive line” if only the equip-
ment uses the connected telephone line.
Note
❒
“FAX” interface on the modem board will be enabled when “RC Gate
and fax shared line” is selected.
B
Set [ Pulse/Tone dialing line ] and [ Outside access No. ] .
❖
Pulse/Tone dialing line
Select your line type.
• Tone dialing phone
• Pulse dialing phone (20PPS)
• Pulse dialing phone (10PPS)
❖
Outside access No.
When the line is connected to the PBX, enter the numbers and symbols
for the external line. If the input is not required, leave it blank.
Note
❒
If a pause is needed between outside access number and the phone
number, enter a comma (,). One comma will give a pause for two sec-
onds.
K
Click [ Next ] .
Note
❒
If you click [ Back ] instead of [ Next ] , entered values will be cleared and you
will return to the
[ RC Gate Registration Wizard: E-mail Settings ]
screen.
The [ RC Gate Registration Wizard: Confirm Settings ] screen will appear.