manualshive.com logo in svg

Ricoh Remote Communication Gate S, Руководство оператора, Страница: 126 / 134

Поделиться
Скачать
Ricoh Remote Communication Gate S Скачать руководство пользователя страница 126

Appendix

110

8

If Problems Described in Error Messages Persist

Contact your service representative if problems described in error messages per-
sist.

When the Office or Devices are Moved

Registration to the Communication Server is required in the following cases.
Contact your service representative.
• When your office has moved (The equipment has moved)
• When managed devices are moved (Except Auto Discovery)
• When managed devices are newly connected (Except Auto Discovery)
• When managed devices are deleted (Except Auto Discovery)

To Return the RC Gate

Contact your service representative when you no longer require the equipment.
Your service representative will collect it and, for security purposes, erase any
information it has stored.

Error Codes

Web UI 
Error 
Code

Cause

Solution

-1703

Cannot register RC Gate.

Check whether or not the RC Gate is already regis-
tered. If the "Auto Discovery Setting Wizard" button is 
displayed on the Top screen of RC Gate wizard, it is al-
ready registered.

-2202

Cannot locate device.

Check the OA I/F (RS-485) cable is connected. 

-2303

Internal application error

Repeat the operation. If the problem persists, reboot 
(disconnect and then reconnect RC Gate's power 
cord), and then repeat the operation. Contact your ser-
vice representative for details.

-2320

Cannot register device.

Check the number of registered devices does not ex-
ceed the maximum. Up to 100 devices can be regis-
tered per RC Gate.

-2323

No search range entered 
when searching for the 
managing devices.

Enter the search range before proceeding to the next 
page.

-2324

No device selections made 
when device information 
requested.

Make selections and register the device.

Содержание Remote Communication Gate S







































































































































Отзывы:

Нет отзывов