Ricoh Remote Communication Gate S Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 134

Ricoh Remote Communication Gate S Скачать руководство пользователя страница 4

ii

R

WARNING:

•

Confirm that the wall outlet is near the equipment and freely accessi-
ble, so that in event of an emergency, it can be unplugged easily.

•

Disconnect the power plug (by pulling the plug, not the cable) if the
power cable or plug becomes frayed or otherwise damaged.

•

Disconnect the power plug (by pulling the plug, not the cable) if any of
the following occurs:

•

You spill something into the equipment.

•

You suspect that your equipment needs service or repair.

•

The external housing of your equipment has been damaged.
Disposal can take place at our authorized dealer.

•

Use the AC adapter supplied with the equipment. Otherwise, a fire, an
electric shock, a equipment failure might occur.

•

Connect the equipment only to the power source described on the in-
side front cover of this manual. Connect the power cord directly into a
wall outlet and do not use an extension cord.

•

Do not damage, break or make any modifications to the power cord.
Do not place heavy objects on it. Do not pull it hard nor bend it more
than necessary. These actions could cause an electric shock or fire.

•

Do not plug in or out with wet hands.

•

While thundering nearby, do not touch this equipment (Type BM1) to
avoid a possible electric shock.

•

For the Type BM1, please connect the telephone line after the power is
on, and disconnect the telephone line before the power is off. If you do
not follow the procedures, you might get an electric shock.

•

The supplied power cord is for use with this equipment only. Do not
use with other appliances. Doing so may result in fire, electric shock,
or injury.

«
...
2
3
4
5
6
...
»

Содержание Remote Communication Gate S







































































































































Отзывы:

Нет отзывов