Ricoh Remote Communication Gate S, Руководство оператора, Страница: 75 / 134

Operating the Auto Discovery Setting Wizard
59
5
Note
❒
See p.85 “Auto Discovery Settings” for the details of each item.
❒
Input
[ SNMP community name ]
in the order of higher usage frequency.
❒
Remove [ SNMP community name ] you do not use.
❒
The illustration shows the screens of the “E-mail (SMTP)” method. Screens
differ when in the “Internet encryption communication (HTTPS)” method.
Disabling Auto Discovery
A
Select “Do not use” for [ Auto Discovery ] .
B
Click [ Next ] .
The [ Auto Discovery Setting Wizard: Setting Result ] screen will appear.
C
Click [ Finish ] .
Top Page appears.
C
Click [ Next ] .
The equipment starts to obtain the address information of the network. The
[ Auto Discovery Setting Wizard: Edit Range ] screen will appear when acquisition
finishes.
D
Add the range which the equipment could not automatically obtain, or edit
the obtained information.
❖
Range and Subnet Mask
The IP address of the network will be calculated from the AND operation
of
[ Range ] and [ Subnet Mask ] .
❖
Discovery
Information will not be collected if you set “Disable” for this item.
❖
Range Name
The IP address for [ Range ] is shown when the information is automatically
obtained. Enter the range name, for example, the workgroup name, do-
main name, or the name of your section. You can enter up to 61 characters.