Ricoh Remote Communication Gate S, Руководство оператора, Страница: 7 / 134

v
USA
❖
FCC Requirements
A This equipment complies with Part 68 of the FCC rules and requirements
adopted by the ACTA. On the cover of this equipment is a label that con-
tains, among other information, a product identifier in the format
US:AAAEQ##TXXXXX. If requested, this number must be provided to the
telephone company.
B This equipment uses the RJ11C USOC jack.
C A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected
to a compatible modular jack that is also compliant. See installation in-
structions for detail.
D The REN is used to determine the number of devices that may be connect-
ed to a telephone line. Excessive RENs on a telephone line may result in the
devices not ringing in response to an incoming call. In most but not all ar-
eas, the sum of RENs should not exceed five (5.0). To be certain of the num-
ber of devices that may be connected to a line, as determined by the total
RENs, contact the local telephone company. The REN for this product is
part of the product identifier that has the format US:AAAEQ##TXXXXX.
The digits represented by ## are the REN without a decimal point (e.g., 03
is a REN of 0.3).
E If this equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of ser-
vice may be required. But if advance notice is not practical, the telephone
company will notify the customer as soon as possible. Also, you will be ad-
vised of your right to file a complaint with the FCC if you believe it is nec-
essary.
F The telephone company may make changes in its facilities, equipment, op-
erations or procedures that could affect the operation of the equipment. If
this happens the telephone company will provide advance notice in order
for you to make necessary modifications to maintain uninterrupted service.
G
If trouble is experienced with this equipment, for repair or warranty infor-
mation, please contact RICOH CORP. CUSTOMER SUPPORT DEPT. at 1-
800-FASTFIX. If the equipment is causing harm to the telephone network,
the telephone company may request that you disconnect the equipment
until the problem is resolved.
H In the event of operation problems (document jam, copy jam, communica-
tion error indication), refer to the solving problems section in this manual.
I Connection to party line service is subject to state tariffs. Contact the state
public utility commission, public service commission or corporation com-
mission for information.
J
If your home has specially wired alarm equipment connected to the tele-
phone line, ensure the installation of this equipment does not disable your
alarm equipment. If you have questions about what will disable alarm
equipment, consult your telephone company or a qualified installer.