Ricoh PJ WX4153N, Руководство по эксплуатации

Страница: 81 / 176

Projecting Images Using Smart Devices
Projecting Images Using Miracast
The projector is compatible with Miracast. Using Miracast, the projector can be connected to your smart
device peer-to-peer, and you can project the screen of your smart device on the projection screen.
• For details about supported file types for this function, see page 75 "Projecting Images Using
Network-compatible Devices".
1. Turn the projector on.
2. Press the [Input] button to switch the input signal to Miracast.
For details about how to switch the input signal, see page 35 "Projecting an Image".
When the standby screen for [Network PC] input is displayed, you can also select [Miracast] at the
upper left corner of the projection screen.
The standby screen for [Miracast] input appears.
3. When the input is switched to [Miracast] for the first time, the screen to specify whether or
not to skip the device confirmation appears. Select either [Skip] or [Do not Skip].
If you select [Skip], you do not need to operate the controls on the projector when using the push-
button method to connect.
This setting can be changed to [Do not Skip] in [Check Connection Terminal] under "Miracast" on
the network application configuration menu.
4. Check the projector name on the projection screen.
DHY106
5. On your smart device, enable the wireless output (Miracast) function.
6. On your smart device, select the projector name checked in Step 3 as the destination
device.
Projecting Images Using Smart Devices
79