Ricoh PJ WX4153N, Руководство по эксплуатации, Страница: 68 / 176

environment. As the radio wave range is limited, use an office or conference room with a good line
of sight.
Configure the network settings in [Wireless LAN (Adhoc)] on Network Setting Wizard. For details
about how to configure the network settings for a wireless LAN in ad hoc mode, see page 70
"Configuring the Wireless LAN Settings for Ad Hoc Mode".
Opening Network Setting Wizard
You can open Network Setting Wizard on the menu screen.
• If you configure both wired and wireless LAN settings using the Network Setting Wizard and your
wireless LAN access point uses WPA/WPA2-EAP as the authentication method, it is recommended
that you configure the wired LAN settings first.
1. Press the [Menu] button.
2. Select [Network/USB Settings], and then press the [ ] button.
3. Select [Network Settings], and then press the [Enter] button.
4. Select [Setup Wizard], and then press the [ ] button.
5. Select [Network Setting Wizard], and then press the [Enter] button.
If Administrator Authentication is enabled, enter the password, and then press the [Enter] button.
The Network Setting Wizard appears.
Configuring the Wired LAN Settings
Connect an Ethernet cable to the projector before configuring the settings.
Contact your network administrator for the information required for configuring network settings.
5. Using the Projector via a Network
66