Ricoh PJ WX4153N, Руководство по эксплуатации

Страница: 75 / 176

For basic operations, such as how to turn on the projector or adjust the focus, see page 35 "Projecting
an Image".
1. Turn the projector on.
2. If [Network PC] is not selected as the input signal, press the [Input] button.
3. Switch the input signal to [Network PC].
For details about how to switch the input signal, see page page 35 "Projecting an Image".
The standby screen for [Network PC] input appears.
4. Check the 4-digit number (identification code) on the projection screen.
Y0E5OX5001
5. Double-click the "QuickProjection" icon on the computer.
6. Enter the identification code on the QuickProjection dialog.
The projector's name or IP address can also be entered instead of the identification code.
7. Click [Projection].
The computer's screen is projected.
While the computer's screen is being projected, a small QuickProjection is displayed in the lower
right corner of the computer's screen.
Projecting a Computer's Screen via a Network
73