Ricoh PJ WX4153N, Руководство по эксплуатации

Страница: 127 / 176

Status Causes Solutions
The projector turned off
during operation, or it does
not turn on.
Flashing interval: 0.2
seconds
The projector has malfunctioned. • Clean the air filter, the
bottom air intake vents, and
the speaker vents. For details,
see page 137 "Cleaning the
Projector".
• Disconnect the power cord,
wait a while, and then turn
on the projector again.
You can also press and hold
the [Power] button on the
remote control or the control
panel for two seconds.
• If the problem cannot be
resolved, contact your
service representative.
The lamp turned off during
operation.
Flashing interval: 1 second
• The interior has overheated.
• The projector is being used
in a high-temperature
environment.
• Place the projector so that the
intake and exhaust vents are
not blocked.
• Clean the air filter, the
bottom air intake vents, and
the speaker vents. For details,
see page 137 "Cleaning the
Projector".
• Disconnect the power cord,
wait a while, and then turn
on the projector again.
You can also press and hold
the [Power] button on the
remote control or the control
panel for two seconds.
• If the problem cannot be
resolved, contact your
service representative.
Indicator Display List
125