Ricoh PJ WX4153N, Руководство по эксплуатации, Страница: 147 / 176

Settings Required to Use Projector Management Utility
Specify the following settings to control the projector using Projector Management Utility:
• Connect the projector to a network using [Network Settings]
• [Projector Name] in [Network Settings]
• [PJLink] items in [Network Application Settings]
For details, see page 103 "Network Settings Menu" and page 113 "Network Application Settings
Menu".
• [PJLink Password] is not specified by factory defaults. It is recommended to register a password as
soon as possible. If you forget the password, register a new password. The new password is valid.
Starting Projector Management Utility
The projector must be registered in advance. For details, see the Projector Management Utility Help.
Projector Management Utility acquires the projector registration information from the configuration file,
when it is launched.
• To use Projector Management Utility, log on using administrator privileges.
1. Double-click the "Projector Management Utility" icon on the desktop.
The information for the projectors detected by the application is displayed.
The following information can be obtained:
• Projector status (power on and off, input signal, Av mute on and off, lamp status, error status)
• Projector information (projector name, manufacturer, IP address)
The functions that can be operated from Projector Management Utility are power on and off, input
signal switching, and mute.
• Depending on the setting in [NW Settings on Standby], the projector does not respond even if the
projector is in standby mode. Press the [Power] button, or change the setting in [NW Settings on
Standby] to [Wired LAN] or [Wired/Wireless LAN] so that the projector can be turned on from
standby mode via a wired LAN or wireless LAN.
• If a communications error prevents the projector from being detected, "?" is displayed. If the
connection failed due to an incorrect password or other reason, "×" is displayed.
• Mute function is not applied if it is not supported by the projector. The projector supports "Video &
Audio" mute. "Video" mute and "Audio" mute are not supported.
Managing the Projector Using Projector Management Utility
145