Ricoh PJ WX4130n, Руководство по эксплуатации

Страница: 100 / 152

If you select [Manual], connect by the "Network Connection" function. You need to
specify [SSID], [Security], and [TCP/IP Settings] when connecting by the "Network
Connection" function.
This function is available when you select [Adhoc] in [Communication Mode].
Default: [Auto]
• Auto
• Manual
• SSID
Enter the SSID to identify the network to which the projector is connected via wireless
LAN. Enter up to 32 characters.
• MAC Address
Display the projector's MAC address.
• Channel
Select the channel to use when [Adhoc] is selected.
Select the channel that matches the type of wireless LAN being used.
The channels available might differ depending on the country.
Default: [11]
For IEEE 802.11 b/g/n (2.4 GHz): 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
• Security
• Authentication Method
Select the wireless LAN authentication method.
Only [Open System] is selectable when you select [Adhoc] in [Communication Mode].
Default: [Open System]
• Open System
• WEP Shared Key
• WPA-PSK
• WPA2-PSK
• Encryption Method
Select the wireless LAN encryption method.
If you select [No Encryption], the communication is not encrypted. [No Encryption] is
selectable only when you select [Open System] in [Authentication Method].
Select [WEP] when you select [Open System] or [WEP Shared Key] in [Authentication
Method].
Select [TKIP] or [CCMP] when you select [WPA-PSK] or [WPA2-PSK] in [Authentication
Method].
4. Changing the Projector Settings
98