Ricoh PJ WX4130n, Руководство по эксплуатации

Страница: 94 / 152

• 3
• 4
Power Off on No Signal
Select the time from the final operation to automatic power shutdown when there are no input
signals.
Default: [Off]
• Off
• 5 min.
• 10 min.
• 20 min.
• 30 min.
Power On Method
Select whether or not to use the auto power on function.
Default: [Manual]
• Manual
Turn the projector on when the [Power] button is pressed.
• Auto.
Automatically turn on the projector when the power cord is connected.
Standby Energy Saving
Select the level of energy saving while on standby.
You can save power by using this function. The energy saving level is highest when you select
[High] and lowest when you select [None]. However, this function affects network functions and
start-up time. Select a mode according to how you use the projector.
Default: [Medium]
• High
Wired LAN and Wireless LAN are disabled when the projector is in standby.
• Medium
Wired LAN is enabled but Wireless LAN is disabled when the projector is in standby.
• Low
Wired LAN and Wireless LAN are enabled.
• None
Wired LAN and Wireless LAN are enabled. Start-up time is faster.
Lamp Power
Select the lamp power level.
4. Changing the Projector Settings
92