Ricoh InfoPrint Manager for AIX, Руководство пользователя

Страница: 360 / 418

b. See if the Type column appears in the details view. The Type column
displays the DSS that the InfoPrint printer uses.
c.
If you do not see the Type column, use Add/Remove menu items to add
it.
Continue with step 9.
9. Select the job again and click Job
→
Move job .
10. In the Move Jobs dialog, select the printer that you want to print the job on.
You can select the same printer it was printing on before or a different one.
When you release the job in step 12 below, if the job is accepted it will go
back into the queue and wait to be printed. Depending on how many jobs are
ahead of it in the queue, it might take a while for the job to print. If you want
the job to print right away, you can either move it to the top of the queue (so
it prints next) or you can change its priority (so it prints sooner, but not
necessarily next).
11. To move the job to the top of the queue, select the job in the InfoPrint
Manager GUI and use the
Make Job First task. To change the priority of the
job, use the Change Priority task.
12. Select the job in the job window and click Job
→
Release .
Note: If the task you want to use does not appear in the menu, use
Add/Remove menu items to add it.
Try this first
"Out of paper" errors and some paper jams are easy to recover from. Most of the
time, you do not have to do anything to InfoPrint Manager to fix them; InfoPrint
Manager just waits until the printer is ready to print again. While it is waiting,
InfoPrint Manager continues to accept jobs and schedule them to the printer.
If the printer stops printing because of a problem, first try this.
1. Check the printer.
v If a lot of pages of the job are ruined and need to be reprinted, stop here.
Do not finish this procedure. Use the “Fixing more complicated problems”
procedure below instead.
v
Otherwise, load paper if the bins are empty or clear paper jams as the printer
console indicates. Once everything is clear, the printer should reset itself and
continue sending jobs. InfoPrint Manager should pick up where it left off.
2.
Find the printer in the InfoPrint Manager GUI. Make sure that its status is
ready . If it is not, select the printer and use the GUI to enable it.
3. If just a few pages of the print job need to be printed again, the easiest thing to
do is to resubmit the job and print only those pages through
page-select
attribute. You can only print part of the job if you are using the PSF DSS and if
the job will be transformed to AFP before it is printed.
4. If just a few sheets of the print job need to be printed again, this can be done
by resubmitting the job and reprinting only certain sheet ranges. You can only
print sheet ranges of the job if you are using the PSF DSS. The sheet range
option does not apply to the ASCII or DPF IPDS datastreams.
Fixing more complicated problems
Use this procedure when the problem is more difficult to fix or if you have to
reprint numerous pages of a job.
346
InfoPrint Manager for AIX: Procedures