Ricoh InfoPrint Manager for AIX, Руководство пользователя

Страница: 152 / 418

in the commands that are generated to run the exit program. For example,
%s
is
equivalent to server name and
%t
is equivalent to threshold value . If a particular exit
attribute contains a value of
memprob %s
in the server server1 , then when InfoPrint
invokes the memory usage shell script it passes
server1
as the first argument.
For example, a shell script named
uplimit
might:
1. Prevent new jobs from arriving at a logical destination by disabling that
InfoPrint object.
2. Prevent the listing of jobs so that queries of the current backlog do not add to
the memory constraints.
3. Ensure that any actual destinations (in this case, the three pooled actual
destinations named
ad
n ) are re-enabled, so that they can reduce any backlog of
jobs that could be causing the problem.
The
uplimit
script might look like this:
#!/bin/ksh
pddisable prt1-ld
pdset -cserv -xdisallow-list-obj-class=job server1
pdenable ad1 ad2 ad3
The lowlimit script might look like this:
1. Re-enable the logical destination so that new jobs are being accepted.
2. Reset the server to allow the listing of job queries.
The
lowlimit
script might look like this:
#!/bin/ksh
pdenable prt1-ld
pdset -cserv -xdisallow-list-obj-class== server1
Note: You can use the Queries to Prevent section on the Memory Usage page to
both add and remove the listing of any queries against a specified InfoPrint object,
such as
Jobs . The Jobs object is the most useful to restrict, but this should be done
cautiously, because once it has been set, you cannot query any jobs from either the
InfoPrint Manager Administration Interface or the InfoPrint Manager Operations
GUI.
Note that if the shell scripts or programs are not in the system path, you must
specify the fully qualified path for the shell scripts that you have customized. If
you misspell a shell script name or refer to a file that does not exist, InfoPrint lets
you change the setting. For more information about the
lower-memory-usage-
threshold , lower-memory-usage-exit , upper-memory-usage-threshold , and
upper-memory-usage-exit server attributes that support this feature, see InfoPrint
Manager: Reference .
Once you have selected the appropriate values, click OK to apply this change and
close the Server Properties dialog.
Monitoring file system use (automatically)
InfoPrint Manager includes support to help you monitor file system usage. The
InfoPrint Manager server polls these critical file systems at regularly scheduled
intervals, and it increases the polling as the usage increases. Initially, the file
system is polled for usage every 16 minutes.
Here is the polling schedule:
138
InfoPrint Manager for AIX: Procedures