Ricoh InfoPrint Manager for AIX, Руководство пользователя

Страница: 277 / 418

3. From this panel, specify the InfoPrint Printing System
→
InfoPrint Utilities
→
Configure Secondary Servers (NFS)
→
Link from Primary Server to Secondary
Server path.
4.
Specify both the host name and the IP address of the InfoPrint Windows server
with which you intend to interoperate for the
Secondary Server Host Name
and the Secondary Server IP Address fields respectively. For example,
wserv1
and
9.99.193.120
represent the InfoPrint Windows server in the pop-up panel
displayed below:
You should specify
no for the Is /ipdata used for job ticketing? field, unless
you are using this AIX InfoPrint Manager server with AIX Fast Connect to
allow for file sharing with an InfoPrint Submit Windows client for preflighting
jobs and saving RIPed files.
You should also allow the
Retain secondary server previously defined? field to
default to
yes
if you have more than one InfoPrint server functioning as a
secondary server.
5.
Once verified, click OK , and then click Done .
6. Return to the first SMIT panel displayed in step 2.
Adding users to and modifying permissions for FST security
groups
1. Set up the FST Security groups on your AIX server by taking the InfoPrint
Printing System → Security → Groups → Show Group path. From the Single
Select List
pop-up dialog, you should see these three groups:
acl_admin
,
admin
, and
oper
. There might be a fourth group,
jobticketer
, if the Job Ticketer
option of the POD feature is also installed.
2. Once you have verified the existence of these two groups, you should make
sure that users in the
admin group can issue all the InfoPrint pd
*
commands.
From SMIT, take the InfoPrint Printing System
→
Security
→
Access Control
→
Access Control for Operations
→
Show Access Control List path.
3. From the Single Select List pop-up dialog, highlight each command and make
sure that
GROUP:admin: r**
displays for each command.
If a particular pd command does not show admin group read authority, use the
SMIT InfoPrint Printing System → Security → Access Control → Access Control
for Operations → Change Access Control List path to specify GROUP:admin in
the
Users or Groups
field of the
Change Access Control List
panel for that pd
command. Note that the
admin
group requires only read authority for each
pd
command.
Note that you might have to do the preceding task only if you are migrating
from an InfoPrint Manager 3.1 system or earlier. If you have installed InfoPrint
Manager on a "clean" machine, the
admin group will have read authority for
all pd commands by default.
4. Once complete, return to the first SMIT panel displayed in Step 2.
5. Take the InfoPrint Printing System → Security → Groups → Add Users to a
Group path. Then specify acl_admin for the Group Name field. Enter the name
of the Windows administrative user you normally log in to the InfoPrint
Manager for Windows server machine as for the
User or Users to Add field.
For the remainder of this procedure we will refer to this Windows
administrative user as
ipwinadmin*
. Note that
ipwinadmin
must be followed by
an asterisk (
*
) to account for the fully qualified host name. (For example,
ipwinadmin@ipwinservermachine.infoprint.com
.)
From the Add Users to a Group panel, specify
admin
for the Group Name
field. Enter the name of the Windows administrative user you normally log in
Chapter 25. Configuring InfoPrint systems for interoperability
263