Ricoh InfoPrint Manager for AIX, Руководство пользователя

Страница: 242 / 418

2. From the actual destination's Printer Properties notebook, click Tuning .
3.
Find the Capture inline OTF resources radio button. If you can't see it, click
Show more .
4. Scroll to the bottom of the screen and select the Yes radio button for the
Capture inline OTF resources setting.
Using multiple fonts with limited printer memory
When you are using the OpenType fonts and you receive the Out of memory error
message, you can decrease the Maximum fonts to keep configuration item for
InfoPrint Manager or increase the size of the character cache from the Printer
console.
To decrease the number of Maximum fonts to keep , complete these steps:
1. Right-click the actual destination in the InfoPrint Manager GUI and click
Properties .
2. Click Tuning .
3. Find and change the Maximum fonts to keep value to a smaller number, such
as 5 .
To increase the character cache size from the Printer's console, complete these
steps:
1. Click Printer Definition .
2.
Click
Printer
.
3. Click Resource Utilization .
4.
Increase Font Usage to the highest setting.
Using Unicode extended code pages
Unicode Extended Code Pages (ECP) are code pages with additional information
used by OpenType and TrueType fonts. This is a introduction for using extended
code pages:
v If OpenType and TrueType fonts are used without ECP, Unicode scalars must be
defined in the hardcoded GUM (GCGID-to-Unicode-Mapping, where GCGID
stands for Graphic Character Global IDentifier) table resident in the printer or
code points will be undefined. While the use of predetermined mappings might
meet many needs, if customization of GCGID to Unicode mappings is required,
an extended code page must be used.
v
The extended code pages can be used on printers that do not support the
extensions. However, the extensions will be stripped out of the code page as it is
downloaded to the printer appearing as if an unextended code page was used.
v
The extended code pages are files on disk just like unextended code pages. The
search order defined in the
InfoPrint Manager: Reference in the description of the
resource-context-font attribute still applies. However, a new file extension of
.ECP is supported for all code pages. Inside the same directory, a code page with
the .ECP file extension will be selected before any other code page with a
matching name but a different file extension.
v
File extensions are secondary search criteria. The search order of directories is
the primary search criterion when searching for any code page resource,
including Unicode extended code pages. The first possible match on the resource
name is used. For example, there might be two code pages called T1USV500.ECP
and T1USV500. The T1USV500.ECP code page is located in a directory only
specified by resource-context. The T1USV500 code page is located in a directory
228
InfoPrint Manager for AIX: Procedures