Ricoh InfoPrint Manager for AIX, Руководство пользователя

Страница: 328 / 418

default, the log-backup-number attribute specifies a value of 10 , meaning that
you can have nine back up files with timestamps and the initial .BAK file. You
can reduce this number as low as
1
or increase it as high as
999
.
For a complete list of the error log attributes that you can customize, see the
"Attributes for logs" section in "InfoPrint object attributes" chapter of
InfoPrint
Manager: Reference .
3. Once you have finished defining your options, save and close the
/var/pd/spl_error.cfg file.
4. To shut down the InfoPrint Manager server so that these customization changes
can take effect, specify from the AIX command line:
pdshutdown -w now
servername
.
Note: If you do not need the customization change to take effect immediately,
you can skip the final two steps and just wait until the next time the AIX
system where the InfoPrint Manager server is installed on is restarted.
5.
To restart the server, enter
start_server -F servername
where
servername
is
the name of your InfoPrint Manager server.
Customizing a Notification daemon error log
By default, the Notification daemon error log starts when the Notification server
starts. Use this procedure to customize the InfoPrint Notification daemon error log.
1.
Find the
notifyd_error.cfg
file from the
/usr/lpp/pd/bin
directory where the file
is installed and copy it into the
/var/pd
directory:
cp /usr/lpp/pd/bin/notifyd_error.cfg /var/pd/notifyd_error.cfg
Note: If you already customize your Notification daemon error log, remember
to change the name or move the current notifyd_error.cfg file in /var/pd so that
your customization values can be copied over into the newer version of the file.
2. Open the copy of the notifyd_error.cfg file that you created and specify the
settings for the log attributes that you want (as shown in Figure 33).
For example, you can modify the
log-backup-number attribute, which lets you
specify the number of backup logs that InfoPrint saves, including the initial
error.log.BAK file.
When you start the Notification daemon after a shut down, it backs up the first
error log by creating an
error.log.BAK file. With each successive restart, it
creates an additional .BAK file, adding a timestamp as a fourth qualifier. By
default, the log-backup-number attribute specifies a value of 10 , meaning that
you can have nine back up files with timestamps and the initial .BAK file. You
can reduce this number as low as
1
or increase it as high as
999
.
For a complete list of the error log attributes that you can customize, see the
see the "Attributes for logs" section in "InfoPrint object attributes" chapter of
InfoPrint Manager: Reference .
#
#
Error Log Configuration File
#
log-size = 1024
log-wrap = true
log-severity = debug
log-backup-number = 10
Figure 33. Sample notifyd_error.cfg file provided by InfoPrint Manager
314
InfoPrint Manager for AIX: Procedures