Ricoh G081, Руководство по обслуживанию

Страница: 142 / 272

PRINTER ENGINE SERVICE MODE
G081/G092 5-18 SM
5 Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
7 Channel Min Sets the minimum value for the wireless LAN channel
adjustment.
DFU
[1 ~ 11 or 13 / 1 / 1 /step]
Europe/Asia: 1 to 13
USA: 1 to 11
Note: Do not change the setting, or the machine may be
out of compliance with local regulations.
840
11 WEP key number Selects the WEP key.
[0 ~ 3 / 0 / 1 /step]
[USB] USB settings
1 Transfer Rate Adjusts the USB transfer rate.
HS/FS: High speed/Full speed auto adjust
(480Mbps/12Mbps)
FS Fixation: Full speed (12Mbps fixed)
Do not change the setting unless there is a data transfer
error using the USB high speed mode.
2 Vendor ID Displays the vendor ID. DFU
3 Product ID Displays the product ID. DFU
844
4 Dev Release Num Displays the development release version number. DFU
[Bluetooth] 851
1 Mode
Select the Bluetooth mode.
0: Public Mode
1: Private Mode
[ 0 or 1 / 0 / - ]
[Plug/Play] Plug and Play 907*
1 Plug/Play Specifies the Plug and Play setting.
[0 ~ 6 /
0 / 1 /step]
•
0: RICOH
•
1: SAVIN
• 2: GESTETNER
• 3: NRG
•
4: LANIER
[Printable Area]
917
# 1 Extended Enlarges the width of the printable area.
The sides of images are sometimes not printed even if
“Wide-A4” is selected with PCL. Set this SP mode to 1 to
enlarge the printable area, but the quality of the image
will be slightly poorer.
[ 0 or 1 /
0 / – ]
0: Off, 1: On
[Pre Heat Mode] 920
#
1 Pre Heat Mode This feature warms the fusing belt when in standby
mode to reduce the first page print time.
[0 or 1 /
0 / – ]
0: On, 1: Off