Ricoh G081, Руководство по обслуживанию

Страница: 143 / 272

PRINTER ENGINE SERVICE MODE
SM 5-19 G081/G092
Service
Tables
5 Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
[Meter Charge]
1 On/Off Enable or disable meter-charge mode.
Important: Turn the main switch off/on after changing
this setting.
On: Enabled
OFF: Disabled
Meter charge mode enabled:
•
"Replace Maintenance Kit" is not displayed on the
operation panel when the PM counter runs out (the
technician replaces the maintenance kit items)
•
The meter charge counter is shown immediately after
the Menu key is pressed.
• The technician must reset the PM counter after
replacing the fusing unit.
Meter charge mode disabled:
•
"Replace Maintenance Kit" is displayed on the
operation panel when the PM counter runs out (the
user replaces the maintenance kit items)
•
The meter charge counter is not shown when the
Menu key is pressed.
•
The PM counter resets automatically after the user
replaces the fusing unit.
930
2 MenteStyle
(Maintenance Style)
Year Contract / Click Charge / M-Pac
[PlainPaperType]
1 Tray1
2 Tray2
3 Tray3
945
6 Bypass tray
Defines whether a tray contains “normal” or “thin” paper,
when the user tool setting for the tray is set to “plain”.
[0 ~ 1 /
1 / 1 /step]
•
0: Yes (Thin)
• 1: No (Normal)
• The user tool setting defines whether each tray
contains “normal”, thin, or OHP. SP5-945 defines
what “normal” means for each tray (either “normal” or
“thin”).
•
The paper thickness terminology reflects Japanese
market conditions.
Normal (plain): Use this for thin paper
Middle thick: Use this for normal paper
Thick: Use this for paper heavier than 105 g/m2 (28
lb)
[EnvelopeType] 946
1 Bypass Tray Selects the default envelope type from "Envelope 1
(default)" or "Envelope 2".
[DebugSerial] 970
1 DebugSerial [0 ~ 0xff / 0x00 / 0 /step] DFU