Ricoh G081, Руководство по обслуживанию

Страница: 149 / 272

PRINTER ENGINE SERVICE MODE
SM 5-25 G081/G092
Service
Tables
5.3.2 INPUT CHECK TABLE
When entering the Input Check mode, 8 digits display the result for a section. Each
digit corresponds to a different device as shown in the table. Refer to 5.1 Service
Program Mode for access information.
Bit No. 7 6 5 4 3 2 1 0
Result 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1
Reading SP5-803
-XXX
Bit Description
0 1
[Tray 1 Paper] Paper End Sensor (Tray 1)
1
0 Paper End Sensor Paper detected Paper end
[Regist] Registration Sensor
2
0 Registration Sensor Paper detected No paper
[Paper Tray 1] Cassette Sensor (Tray 1)
0 Tray set Not set Set
1 Paper Size Switch 1
3
2 Paper Size Switch 2
See Table 1.
1: Pushed
[By-pass Paper] By-pass Paper Sensor
4
0 By-pass Paper Sensor Paper detected No paper
[By-pass Home] By-pass Home Position Sensor
5
0 By-pass Home Position Sensor Not home position Home position
[Tray 2 Paper] Paper End Sensor (Tray 2)
6
Paper End Sensor Paper detected Paper end
[Tray 2 Jam] Jam Sensor (Tray 2)
7
0 Jam Sensor Paper detected No paper
[Paper Tray 2] Cassette Sensor (Tray 2)
0 Tray set Not set Set
1 Paper Size Switch 1
8
2 Paper Size Switch 2
See Table 1.
1: Pushed
[Tray 3 Paper] Paper End Sensor (Tray 3)
9
Paper End Sensor Paper detected Paper end
[Tray 3 Jam] Jam Sensor (Tray 3)
10
0 Jam Sensor Paper detected No paper
[Paper Tray 3] Cassette Sensor (Tray 3)
0 Tray set Not set Set
1 Paper Size Switch 1
11
2 Paper Size Switch 2
See Table 1.
1: Pushed
[P Exit Full] Exit Paper Full Sensor
12
0 Exit Paper Full Sensor Not full Paper full
[Paper Exit] Exit Sensor
13
0 Exit Sensor Paper detected No paper
[Dpx Jam] Duplex Jam Sensor
14
0 Duplex Jam Sensor Paper detected No paper
[Dpx Unit] Duplex Unit Sensor
15
0 Duplex Unit Sensor No unit Duplex unit detected
[Fusing JAM] Fusing Exit Sensor
16
0 Fusing Exit Sensor Paper detected No paper
[Fusing Roller] Fusing Roller Rotation Sensor
17
0 Fusing Roller Rotation Sensor
Not rotating Rotating