Ricoh G081, Руководство по обслуживанию

Страница: 126 / 272

SERVICE PROGRAM MODE
G081/G092 5-2 SM
Accessing the Required Program
Use the “Up/Down arrow” keys to scroll through the menu listing.
1. Service Menu: Controller service modes
2. Engine Maintenance: Engine service modes
3: End: Exit service mode
To select an item, press the “Enter” key. Then the sub-menu will appear.
Scroll through the sub menu items using the “Up/Down arrow” keys.
To go back to a higher menu level, press the “Escape” key.
NOTE: Certain SP modes can also be selected (accessed) from the operation
panel by pressing: “Enter,” “Escape,” then the “Menu” key in sequence,
(not together). These certain SP modes are generally related to the various
communication options. For Example: SP5-851-1 [Bluetooth] and SP5-844-
1 [USB] can be accessed using the procedure described here.
Inputting a Value or Setting for a Service Program
Access the required program mode as explained above. The setting appearing on
the display is the current setting.
Select the required setting using the “Up/Down arrow” keys, then press the “Enter”
key. The previous value remains if the “Enter” key is not pressed.
Exiting Service Mode
Select “3. End” from the service mode main menu, then press the “Enter” key.
NOTE: To make the settings effective, turn the main switch off and on after exiting
service mode.