Ricoh G081, Руководство по обслуживанию

Страница: 271 / 272

PRINTER CONTROLLER SERVICE MODE
SM 5-3 G081/G092
Service
Tables
5.2 PRINTER CONTROLLER SERVICE MODE
NOTE: In the Function/[Setting] column:
•
The related pop-up screen name and function name (if any) appear in
parenthesis following the function description.
•
Comments are in italics .
•
The setting range is enclosed in brackets, with the default setting written
in
bold .
•
An asterisk (*) after the mode number means that this mode’s value is
stored in the NVRAM. If you do a RAM reset, all these SP modes will be
returned to their factory settings.
•
DFU stands for D esign/ F actory U se only. Values marked DFU should
not be changed.
•
FA stands for F actory A djustment only. Values marked FA should not be
changed.
•
The Printer Controller is referred to as the Main Control Board.
5.2.1 SERVICE MENU-CONTROLLER SERVICE MODES
(“1. SERVICE”)
Mode No.
(Class 1 and 2)
Function / [Setting]
[Bit Switch] – SP1001
1 Bit Switch 1
2 Bit Switch 2
3 Bit Switch 3
4 Bit Switch 4
5 Bit Switch 5
6 Bit Switch 6
7 Bit Switch 7
8 Bit Switch 8
(See “Bit Switch Settings”.)
[Clear Setting] – SP1003
1 Clear Setting Initializes the settings in the “System” menu of the
user tools.
[Print Summary] – SP1004
1 Print Summary Prints the service summary sheet (a summary of all
the controller settings).
[DispVersion] Display Version – SP1005
1 Disp Version Displays the version of the controller firmware.
[ToneCtlSet] Toner Control Setting – SP1101
1 Tone (Factory)
2 Tone (Prev.)
3 Tone (Current)
Recalls the gamma settings. Select the factory,
previous, or current setting.
[ToneCtlSet] Toner Control Setting – SP1102
1 *1200 x 1200 Photo
2 600 x 600 Text
3 1200 x 600 Text
4 600 x 600 Photo
5 1200 x 600 Photo
Selects the printing mode (resolution) for the printer
gamma adjustment. When selecting a print mode,
an asterisk (*) is displayed in the front of the mode.
⇒
Rev. 10/2003