Ricoh G081, Руководство по обслуживанию

Страница: 140 / 272

PRINTER ENGINE SERVICE MODE
G081/G092 5-16 SM
5 Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
[ULimitAutoSet] User Limited Auto Set 401*
14 ULimitAutoSet Activates the auto user code registration function (prints
are counted and logged for each user code and the
counts can be viewed with SmartNetMonitor).
[0 ~ 1 /
1 / 1/step] 0: Inactivated
• 1: Activated
[UCodeCtrClr] Use Code Counter Clear 404
UcodeCtrClr Clear all counters for users.
[0 ~ 0 /
0 / 0/step]
[Memory Clear]
1 All Clears the settings from the NVRAM and initializes the
settings.
[0 ~ 0 /
0 / 0/step]
2 Engine Setting Clears all the engine settings and counters.
Engine settings and engine counters can be cleared
independently with SP5-998-001 and 002.
[0 ~ 0 /
0 / 0/step]
3 SCS (System Control
Service) Clears the system settings.
[0 ~ 0 /
0 / 0/step]
4 IMH (Image Memory
Handler) Clears IMH data. DFU
[0 ~ 0 / 0 / 0/step]
5 MCS (Memory Control
Service) Clears MCS data. DFU
[0 ~ 0 / 0 / 0/step]
• MCS is for network settings.
8 PRT Clears the user tool settings.
[0 ~ 0 /
0 / 0/step]
801
11 NCS Clears the network settings.
[0 ~ 0 /
0 / 0/step]
803 [Input Check] See section 5.3.2.
804 [Output Check] See section 5.3.3.
[Destination] Destination Code Display 808
1 Destination Displays the destination code.
[ 0 = JP, 1 = NA, 2 = EU, 3 = AS ]
[Serial Number] Serial Number Display
2 DispCntl SN (Display
Controller Serial
Number) Display the machine serial number
3 DisEng SN (Display
Engine Serial Number) Display the mechanical engine serial number
811
4
# SetEng SN (Set
Engine Serial Number) Set the mechanical engine serial number when the
EEPROM on the engine control board is replaced.
[FAX TEL No.] 812*
2 FAX TEL No. Sets the fax or telephone number for a service
representative by using the enter key and the down
arrow key.
[0 ~ 0 /
0 / 0/step]
Both numbers and alphabetic characters can be input.