Ricoh G081, Руководство по обслуживанию

Страница: 46 / 272

MACHINE INSTALLATION
G081/G092 1-18 SM
1.2.9 CONFIGURING THE PRINTER FOR THE NETWORK
When using the printer in a network environment, you must configure the printer
settings using the printer’s operation panel. The following list is the items you can
set and their default settings.
IP Address 011.022.033.044
Subnet Mask 000.000.000.000
Gateway Address 000.000.000.000
Network Boot None
Frame Type (NW) Auto
Active Protocol TCP/IP
Ethernet Auto
The procedure below shows an example to specify TCP/IP as the active protocol.
1. Press the Menu key. “Menu” appears on the
panel display.
2. Press the “
#
” or “
$
” key to display “Host
Interface,” and then press the Enter key. The
interface setting menu appears.
3. Start the protocol for use.
1) Press the “
#
” or “
$
” key to display “Network
Setup,” and then press the Enter key.
2) Press the “
#
” or “
$
” key to display “Active
Protocol,” and then press the Enter key.
3) Press the “
#
” or “
$
” key to display “TCP/IP,”
and then press the Enter key.
Menu:
Paper Input
G081I902.WMF
Menu:
Host Interface
G081I914.WMF
Host Interface:
Network Setup
G081I915.WMF
Network Setup:
Active Protocol
G081I916.WMF
Active Protocol:
TCP/IP
G081I917.WMF