Ricoh G081, Руководство по обслуживанию

Страница: 158 / 272

POWER ON SELF-TEST
G081/G092 5-34 SM
Detailed self-diagnostics
This detailed self-diagnostic test requires a loop-back connector (P/N: G0219350).
1. Turn off the machine and attach the loop-back connector to the parallel
interface.
2. Turn on the machine while pressing the “Online” key and “Enter” key together.
3. The machine automatically starts the self-diagnostics and prints the diagnostic
report after completing the test.
•
Refer to the diagnostics report for the detected errors. The errors detected
during self-diagnostics can be checked with SP7-832-001 (Diag. Result).
•
Refer to section “4.2 Controller Error,” for details about the error codes.
5.5.2 ENGINE SELF-DIAGNOSTIC
Some processes of the engine self-diagnostic
test are executed whenever the main power
switch is turned on, until the printer goes in to the
ready status. Others are executed only when a
printing job is coming in to the printer, when the
printer goes in to the printing status.
Power ON
Belt tension unit cam
position check
Toner cartridge
check
By-pass tray check
Color adjustment
Ready
Printing
Primary error check
G081S517.WMF