Ricoh G031, Руководство по обслуживанию

Страница: 173 / 345

OPERATOR ERRORS
SM 7-1 G031/G032
T
rouble
-
s
hooting
7. TROUBLESHOOTING
7.1 OPERATOR ERRORS
Function Error Message
Front Cover Open Close Front Cover
Paper Size Error Check Paper Size Tray XX
Paper Misfeed Remove Misfeed Front Cover & Tray
Remove Misfeed Open Front Cover
Toner Cartridge Installation Error Replace Toner Cartridge
Fusing Unit Installation Error Replacing Fusing Unit
Maintenance Kit Replacement Time Replace Maintenance Kit
Tray Installation Error Install Tray XX
Paper End Tray XX: Add paper
Paper Tray Error Load Tray XX: {paper size}
Load By-pass Tray XX: {paper size}
Memory Overflow Memory Overflow
Print Overrun Print Overrun
Hard Disk Error Error SC 2600
Network Interface Board Error Error SC 2700
RS232C Board Error Error SC 2900
Memory Unit (SIMM) Error Error SC 3100
Right Optional Board Error Error SC 3200
Left Optional Board Error (Stinger-P3 only) Error SC 3201
NOTE: XX, indicates that paper tray or paper size is variable.
Front Cover Open
Message:
Close Front Cover
Definition:
The front cover is open.
Reset Method:
Close the front cover.
Paper Size Error
Message:
Check Paper Size Tray XX
Definition:
The paper size setting of the tray differs from the actual paper size in the tray.
Reset Method:
•
Pull out the paper tray and check the paper size setting then put the tray
back.
•
Press “Enter” and load the correct size of paper into the tray.