Ricoh G031, Руководство по обслуживанию

Страница: 108 / 345

SERVICE PROGRAM MODE
G031/G032 4-6 SM
Menu Level
Level 1 Level 2
Function Settings
Views and resets the paper feed
counter.
To view the counter, press the
“Enter” key then press the
“Escape” key.
Paper Feed Paper Feed
Roller Counter
& Reset
To reset the counter, press the
“Enter” key again after the counter
is displayed.
Views and resets the transfer roller
counter.
To view the counter, press the
“Enter” key then press the
“Escape” key.
Transfer
Roller Transfer Roller
Counter &
Reset
To reset the counter, press the
“Enter” key again after the counter
is displayed.
Views and resets the fusing
counter.
To view the counter, press the
“Enter” key then press the
“Escape” key.
Fusing Fusing Counter
& Reset
To reset the counter, press the
“Enter” key again after the counter
is displayed.
Views and resets the error log list
and the error log counters.
To view the log and counters,
press the “Enter” key then press
the “Escape” key.
Counter
Clear
Error Log &
Counter Error Log/
Counter &
Reset
To clear the log and counters,
press the “Enter” key again after it
is displayed.
Up to ten errors
are registered.
These are the
same as the
‘Error Logging’
entries on the
Print Log.
Resets all software counters. Also,
resets all adjustment settings and
log entries. EEPROM
Clear Memory All
Clear on Engine
Control Board
Normally, this service mode
should not be used.
Fusing
Error Clear Clear the Fuser
Error Resets a fusing unit error.
Prints the print log Print Log
To print the log sheet, select the
tray using the “
V
/
W
” keys then
press the “Enter” key.
See the “Print Log” section for
details.
Engine ROM Version
Display (ECB) Displays the Engine Control Board
ROM version.
Controller
F/W Version
Display (Main
Control Board) Displays the main printer control
board firmware version.
ROM
Version
Network
ROM NIB Firmware
version Display
Displays the NIB firmware version.