Ricoh G031, Руководство по обслуживанию

Страница: 231 / 345

FLASH ROM UPDATE
SM 10-13 G031/G032
Netw
ork
In
te
rf
ace
Board G91
9
3.2.3 FTPDL UTILITY (FOR TCP/IP NETWORKS)
System Requirements
•
Windows 3.1x/95/98, Windows NT4.0
•
TCP/IP protocol installed
Network Requirements
•
The target network interface board (NIB) must have a valid IP address.
NOTE: If the NIB is in the “DOWN” status, this utility cannot be used because
no IP address is assigned to the NIB. Use the “Flashup” utility instead.
Installation
1. Unzip ftpdl.ZIP to a temporary folder (directory). The following files should be
extracted there.
FTPDL.ZIP
File size Date Time Name
--------- ---------- ---------- -------------
280,481 07-10-96 02:15:12 _INST16.EX_
8,192 09-07-95 20:22:40 _ISDEL.EXE
668,293 12-21-98 16:52:20 _SETUP.1
5,984 04-29-96 08:25:22 _SETUP.DLL
156,374 12-21-98 16:52:06 _SETUP.LIB
5 12-21-98 16:52:20 DISK1.ID
1,146 12-21-98 16:50:54 Readme.txt
44,608 07-24-96 04:00:00 SETUP.EXE
33 12-21-98 16:52:10 SETUP.INI
64,864 07-31-96 12:50:10 SETUP.INS
391 12-21-98 16:52:04 SETUP.ISS
226 12-21-98 16:52:20 SETUP.PKG
--------- ---------- ---------- -------------
1,230,597 bytes 12 files
1. Run “Setup.exe” from the folder (directory).
2. Click “Next >” in the “Welcome” dialog box.
3. Read the readme.txt file displayed in the “Readme Information” dialog box, then
click “Next >”.
4. In the “Destination Location” dialog box, choose a folder (directory) to install the
software, then click “Next >”.
5. Confirm the program folder (group) name, then click “Next >”.
6. After the software has been installed, click “Finish” in the “Setup Complete”
dialog box.