Ricoh Aficio FX10, Руководство по обслуживанию

Страница: 237 / 284

Code Meaning Suggested Cause/Action
2-10 The modem cannot enter
tx mode Replace the FCU.
2-11 Only one V.21
connection flag was
received Change the FCU.
2-12 Modem clock irregularity Replace the FCU.
2-20 Abnormal
coding/decoding (cpu not
ready) Replace the FCU.
2-50 The machine reset itself Replace the FCU.
4-00 One page took longer
than 8 minutes to transmit Check for a bad line.
Try the communication at a lower resolution, or
without halftone.
Change the FCU.
4-01 Line current was cut Check the line connector.
Check the connection between FCU and NCU.
Check for line problems.
Replace the FCU or the NCU.
4-02 The other end cut the
received page as it was
longer than the maximum
limit. Split the page into smaller pieces, or ask the other
end to change their maximum receive length setting,
then resend.
4-10 Communication failed
because of ID Code
mismatch (Closed
Network) or Tel. No./CSI
mismatch (Protection
against Wrong
Connections) Get the ID Codes the same and/or the CSIs
programmed correctly, then resend.
The machine at the other end may be defective.
5-00 Data reconstruction not
possible Replace the FCU.
5-10 DCR timer expired Replace the FCU.
5-20 Storage impossible
because of a lack of
memory Temporary memory shortage.
Test the SAF memory.
Replace the FCU or optional IC card.
5-21 Memory overflow
5-22 Mode table overflow after
the second page of a
scanned document Wait for the messages which are currently in the
memory to be sent or delete some files from memory.
5-23 Print data error when
printing a substitute rx or
confidential rx message Test the SAF memory.
Ask the other end to resend the message.
Replace the FCU or IC memory card.
5-24 Memory overflow after
the second page of a
scanned document Try using a lower resolution setting.
Wait for the messages which are currently in the
memory to be sent or delete some files from memory.
5-25 SAF file access error Replace the FCU or IC memory card.
5-30 Mode table for the first
page to be printed was
not effective Replace the FCU or IC memory card.
TROUBLESHOOTING June 10th, 1997
ERROR CODES
7-32