Ricoh Aficio FX10, Руководство по обслуживанию

Страница: 72 / 284

2.3. SYSTEM FEATURES
2.3.1. Power Saver Modes
- Power Saver Timer -
When the power saver timer expires, the machine automatically goes into a
Power Saver Mode. During the power saver mode, the fuisng lamp is turned
off or on according to the User Switch 05, bit 6 setting. All the LEDs on the op-
eration panel are turend off and "Saving Energy" is displayed on the LCD.
The CPU is not turned off during the power saver mode.
The machine returns to the standby mode in the following conditions:
•
When the document sensor is activated.
•
When any key on the operation panel is pressed.
•
When the handset goes off-hook.
Cross Reference
Power saver timer initial setting: System Switch 0B, bits 2 and 3
(1 minute, 3 minutes, 5 minutes, or Unlimited: Timer disabled)
The machine will not turn off the fusing lamp if one of the following conditions
exists.
•
Mechanical error(s)
•
Service call error(s)
De
ta
ile
d
Se
c
tio
n
De
s
c
rip
tio
n
s
June 10th, 1997 DETAILED SECTION DESCRIPTIONS
SYSTEM FEATURES
2-43