Ricoh A085, Руководство пользователя

Страница: 418 / 617

Mode No. Function Data
33
Black (ID sensor)
Pattern Bias
Sets the bias voltage applied to the
development roller for the ID sensor pattern.
(0: –200 V= Normal
1: –160 V= Lighter
2: –220 V= Darker
3: –240 V= Darkest)
0: N
1: L
2: H
3: HH
•
34 ADS Density
Selects the image density level in ADS mode.
(Data 1: Increases charge grid voltage [–50 V].
Development bias voltage has standard value.
Data 2: Increases development bias voltage
[–40 V]. Charge grid voltage has standard
value.)
0: N (Normal)
1: H (Darker)
2: L (Lighter)
35 Black ID Detection
Black ID sensor check is performed every 5
copies or 10 copies.
(If low image density occurs in the toner near
end condition, change the data to "1".)
0: 10 copies
1: 5 copies
•
36
Image Shift
(Duplex 1)
Selects the margin on the right side of the
reverse page in duplex 1 mode.
(For type 2 copier only. When duplex 1
[1-sided original mode] is selected, this margin
is automatically added.)
0: 5 mm
1: 0 mm
2: 10 mm
3: 15 mm
37 Black Bias
Adjusts black bias voltage if the image density
at level 4 cannot be adjusted by (SP48
exposure lamp voltage).
This must be done only other replacing the
OPC drum.
(0: Vo = Normal
1: Vo +40 V = Darkest
2: Vo +20 V = Darker
3: Vo –20 V = Lighter
4: Vo –40 V = Lightest)
0: N
1: HH
2: H
3: L
4: LL
•
38
Edge Erase
Selects the width of the edge erase margin.
(Only when the editor is installed.)
0: 10 mm
1: 5 mm
2: 15 mm
3: 20 mm
•
39 Center Erase
Selects the width of the center erase margin.
(Only when the editor is installed.)
0: 20 mm
1: 10 mm
2: 15 mm
3: 25 mm
40 Jogger Span
Adjusts the stop position of the jogger fences.
(For type 2 copier only. 0.5 mm per step. [max,
–4.0 mm to +3.5 mm].)
0
~
15
8 = default
41
Lead Edge Erase
❐
Adjusts lead edge erase margin.
(0.5 mm per step [max –4.0 mm to +3.5 mm].)
0
~
15
8 = default
42 Registration
❐
Adjusts lead edge registration.
(0.5 mm per step [max –4.0 mm to +3.5 mm].)
0
~
15
8 = default
43
Vertical
Magnification
❐
Adjusts magnification in the paper travel
direction.
(0.2 % per step. [max. –1.6% to +1.4%].)
0
~
15
8 = default
Service
Tables
12 February 1992 SERVICE PROGRAM MODE
4-15