Ricoh A085, Руководство пользователя

Страница: 415 / 617

2.2 SERVICE PROGRAM MODE TABLE
NOTE: 1. A "
❐
" after the mode name means that copies can be made.
For these modes, the copier goes automatically into copy
mode when an SP mode number is selected by pressing the
"#" key, or when the data number for adjustment is entered by
pressing the "#" key after selecting the SP mode number.
To make copies, enter desired copy quantity, select ID level
and paper tray, then press the Start key.
If you do not wish to make copies, press the "#" key instead of
the Start key.
2. A "
•
" before the mode number means that the mode can be
accessed by users and sales representatives.
3. In the Function column, comments (extra information) are in
italics.
4. In the
Data column, the default value is printed in bold letters.
Mode No. Function Data
2 Free Run Set
Sets the copier in free run mode.
(The copier runs without paper feeding
.
After SP2 is set, press the start key to start
free run operation.
Before pressing the start key you can select
any other SP mode in which copying is
possible [
❐
mark]. ["#"
→
SPNo.
→
"#"
→
Start
key].)
3 Free Run Reset
❐
Resets the copier from free run mode.
4 Forced Start
❐
Copies can be made before being warmed up.
(Copy quality and paper transport are not
assured
.)
5 Lamp OFF
❐
Copies are made with exposure lamp OFF.
(Black copies are made.)
6
No Misfeed
Detection
❐
Copies are made without ON check of jam
detection.
7
Call Service
Indicator
Indicates the cause of a blinking call service
indicator.
(Indicates 0, 1, 2, 3, 12, 13, 23, or 123 in the
three digit indicator.)
0: Normal
1: PM
2: ID sensor
failure
3: Toner
overflow.
8 Input Check
❐
Displays the input data from sensors and
switches.
(For data, see page 4 - 28.)
9 Output Check
Electrical components turn on.
(For data, see page 4 - 31.)
SERVICE PROGRAM MODE 12 February 1992
4-12