Ricoh A085, Руководство пользователя

Страница: 514 / 617

6.7 ERASE LAMP UNIT REPLACEMENT
1. Remove the drum and the toner shield glass from the drum unit (see
Drum Replacement and Toner Shield Glass Cleaning).
2. While unhooking the positioning pawls [A], remove the erase lamp unit [B]
(1 connector) as shown.
3. Couple the erase lamp connector [C] with a new erase lamp unit and
install the unit in the drum unit.
NOTE: Make sure that the erase lamp unit is hooked correctly with
positioning pawls and the harness is set in position.
4. Reassemble the drum unit.
NOTE: When reinstalling the drum unit top plate, be careful not to nick or
pinch the erase lamp unit harness.
5. If you have replaced the erase lamp unit with a different type (standard
type and edit type), set SP84 (Editing Eraser) to correct the setting for the
type of lamp installed.
[C]
[B]
[A]
AROUND THE DRUM 12 February 1992
5-58