Ricoh A085, Руководство пользователя

Страница: 396 / 617

[Lower tray heater]
10. Pass the heater harness [A] through the lower heater access hole [B] and
install the tray heater assembly as shown (1 screw at the front).
11. Connect the heater connector [C] with the copier as shown (2P red).
[Upper and Lower tray heaters]
12. Stick the warning high temp. decal [D] on the plate, to the right of the tray
heater bracket as shown.
13. Reassemble the copier.
14. Tell the customer that the copier main switch should be turned off and the
power cord should not be unplugged at night. Otherwise, the tray heaters
will not function.
[D]
[C]
[B]
[A]
Install
a
ti
on
12 February 1992 COPIER INSTALLATION
3-23