Ricoh A085, Руководство пользователя

Страница: 428 / 617

Mode No. Function Data
130-12 Jam Exit Counter
Displays the total number of paper jams in the
copier exit area.
130-13 Jam Sorter Counter
Displays the total number of paper jams in the
sorter.
130-14 Jam ADF Counter
Displays the total number of original jams in
the ADF.
150
Paper Feed
Timing
(By-pass/LCT)
❐
Adjusts the registration paper buckle amount
for the paper fed from the by-pass feed table
or the LCT.
(The data value is the approximate distance
that the paper is fed after the lead edge is
detected by the registration sensor.)
0: 27 mm
–
15: 42 mm
16: 43 mm
17: 44 mm
–
24: 51 mm
151
Paper Feed
Timing (1st tray)
❐
Adjusts the registration paper buckle amount
for the paper fed from the upper paper tray
(Type 1 & 3 only).
(The data value is the approximate distance
that the paper is fed after the lead edge is
detected by the registration sensor.)
0: 27 mm
–
9: 36 mm
10: 37 mm
11: 38 mm
–
24: 51 mm
152
Paper Feed
Timing
(2nd
∼
5th tray)
❐
Adjusts the registration paper buckle amount
for the paper fed from the lower paper tray or
the paper tray unit.
(The data value is the approximate distance
that the paper is fed after the lead edge is
detected by the registration sensor.)
0: 27 mm
–
6: 33 mm
7: 34 mm
8: 35 mm
–
24: 51 mm
153
Paper Feed
Timing (Duplex)
❐
Adjusts the registration paper buckle amount
for the paper fed from the duplex tray.
(The data value is the approximate distance
that the paper is fed after the lead edge is
detected by the registration sensor.)
0: 27 mm
–
14: 41 mm
15: 42 mm
16: 43 mm
–
24: 51 mm
154
Single Duplex
Reverse Timing
❐
Adjusts the switch-back timing of paper in the
duplex tray in single 2-sided copying.
(The smaller the data is, the earlier the
switch-back timing becomes.)
0: –4 mm
–
3: –1 mm
4:
5: +1 mm
–
8: +4 mm
157
Trail Edge Erase
❐
Adjusts the trail edge erase start timing.
(When the default value is selected, the trail
edge erase starts 2mm after the trail edge of
the image.)
0: –6 mm
–
11: –0.5 mm
12:
13: +0.5 mm
–
15: 1.5 mm
Service
Tables
12 February 1992 SERVICE PROGRAM MODE
4-25