Ricoh A085, Руководство пользователя

Страница: 175 / 617

40. Confirm that level 2 of the gray scale is just visible on the copy.
If the image density is not correct, go through the following steps.
(1) Press the enter key twice.
(2) Change the exposure lamp voltage data displayed in the
magnification ratio indicator. Use the number keys and follow these
rules:
If the image density is too dark: increase the setting
If the image density is too light: decrease the setting
NOTE: The data can be set between 50 and 75 in 0.5 steps.
(3) Press the enter key and then make a copy.
(4) Confirm if the image density is correct or not.
If not, repeat the above steps from (1) to (3).
NOTE: The initial exposure lamp voltage must be adjusted in this step. If
the adjustment is done after step 43 (the machine performs the
initial V
L
pattern detection), the reference voltage for the
exposure lamp voltage correction will be wrong throughout the
drum’s life.
COPIER INSTALLATION 10 July 1992
3-10