Ricoh 402334 - IS 200E, Руководство по эксплуатации

Страница: 198 / 234

Appendix
190
11
This machine does not work in ac-
cordance with the scan settings
configured on the Web Status
Monitor. • After configuring the scan settings (specifically, after
clicking [ OK ] on the [ Scan Settings ] screen) on the Web
Status Monitor, press the
{{{{
Clear Modes
}}}}
key. By press-
ing the
{{{{
Clear Modes
}}}}
key, the settings under [ Scan Set-
tings ] of this machine instantly reflect the settings
configured using the Web Status Monitor.
Some of the registered destina-
tions are not displayed on the des-
tination list. • Check if [ All ] is displayed at the top right corner of the
“Select destination(s).” screen.
If another title like
[ A ]
,
[ B ]
or
[ Freq. ]
is on the screen, it
means that you have searched destinations using the
{{{{
./*
}}}}
(Title) key, and only the matched destinations are
currently available for selection. In this case, press the
{{{{
./*
}}}}
(Title) key, highlight [ All ] , and then press [ OK ] . See
p.134 “To recall all available destinations” for details.
The e-mail destinations (including
Cc destinations) are cleared when
a file name is specified. When you perform a Send Scan operation, note the follow-
ing things.
• You cannot use the following functions at the same
time:
• Scan to E-mail (referred to as “e-mail function”
here)
• Scan to Folder (SMB) (referred to as “SMB function”
here)
• Scan to FTP (referred to as “FTP function” here)
When you select [ File Name ] and then press [ Settings ] on
the screen shown above, it means that you select either
of the SMB or FTP function, and the e-mail function is
disabled. Because of this, the e-mail destinations are
cleared automatically.Specifying
[ To: ] , [ Cc: ] , or [ Subject ]
disables the SMB or FTP function. Specifying [ SMB ] dis-
ables the e-mail and FTP function. Specifying [ FTP ] dis-
ables the e-mail and SMB function.
Problem Possible Cause and Required Action