Ricoh 402334 - IS 200E, Руководство по эксплуатации

Страница: 148 / 234

Sending Scan File by E-mail
140
5
Performing Scan Operation
Starting a Scan Operation
To start with originals in the ADF
AAAA
Confirm that the E-mail Ready
screen is displayed.
W h e n “
S e l e c t d e s t i n a -
tion(s).
” is displayed, no desti-
n a t i o n i s s e l e c t e d . S e l e c t a
destination to display “
Ready
” on
the screen.
BBBB
Press the
{{{{
Start
}}}}
key.
Scanning originals in the ADF
starts.
Note
❒
To interrupt scanning, press the
{{{{
Clear/Stop
}}}}
key.
❒
When “
Show Options after
Each Scan Job
” is selected for
[ End of Scan Option ] under
[ 2.Send Scan Settings ] , a screen
for selecting the next operation
appears after scanning of all the
originals in the ADF is complet-
ed.
• Press
[ Add ]
to continue scan-
ning to add scanned data to
the current image file.
• Press [ New Job ] to finish the
current scanning job and
send the scanned data. You
can start a new job with the
current settings after the
scanned data is sent.
• Press [ OK ] to finish the cur-
rent scanning job, send the
scanned data, and then re-
turn to the initial screen
when the power is turned on.
If you do not press any key,
this machine acts as
[ OK ]
is
pressed, after the specified
period.
When scanning finishes properly,
the e-mail is sent to the e-mail
(SMTP) server.
B
appears at the
upper right corner of the screen
while the e-mail is sent.
Note
❒
You cannot perform any opera-
tions while
B
is displayed on
the screen.
❒
Do not turn the power of this
machine off while
B
is dis-
played on the screen.
B
disappears when the E-mail has
been sent to the E-mail (SMTP)
server, and the E-mail standby
screen appears.
AFJ044S