Ricoh 402334 - IS 200E, Руководство по эксплуатации

Страница: 194 / 234

Appendix
186
11
Cannot communicate with the
server. Check the server status
and connection.
[ Exit ]
• If you specified to perform a Scan to Folder
(SMB) operation, check if the power of the
computer on which the Windows shared
folder exists is turned on.
• If you specified to perform a Send Scan op-
eration using a delivery server, check if the
delivery server is turned on.
• If you specified to perform a [ Enter Custom
Send File ] operation using the Web Status
Monitor, click [ Back ] on the Web browser,
enter [ Login Password ] , and then click [ Test ] .
If the message “Connection to the Send File
Path has failed. Confirm the settings.” is
displayed,
[ Send File Path ] is not specified
correctly.
Sending data has failed. Scan
with the same settings and re-
send.
[ Exit ]
• The machine failed to send scanned data
due to a network connection problem. Af-
ter confirming that the network cable is
properly connected, try performing anoth-
er Send Scan operation using the same set-
tings. If the same message appears, there
may be network congestion. Consult your
network administrator.
Exceeded max. scan pages. To
scan remaining pages as a new
job, press [Exit] then press
the Start key.
[ Exit ]
• Continued scanning and reached the max-
imum scan limit (100 pages). Press [ Exit ] .
The scanned original is sent. The specified
destination and scanning condition set-
tings remain the same even after you have
pressed
[ Exit ]
. Place the next original and
press the
{{{{
Start
}}}}
key.
Message Possible Cause and Required Action