Beijing RichAuto S&T Co., Ltd.
Forging ahead and determined to win 50
spindle 2(note that positive or negative).
Same to spindle 3,4
.
Steps
：
Press
“
”
to get in
“
Tool Setup
”
，
Screen displays
“
Press OK key to set tool
offset by manual mode,it’s very simple but not accurate,press cancel to set by mumber.
”
,and then
press
“
”,
the screen shows
:
Press ―
‖/―
‖ to move cursor to where users want to modify,and then press
―
‖
，
input the new number
，
and press ―
‖ to save.
After setting spindle 2,press
“
”
,the screen will show the interface of ―SpindleOffset
of 3‖,same to spindle 4.
b)
Offset of Z
：
1)
The machine is not equipped with C.A.D(Tool sensor)
Firstly, get in ―SYSTEM SETUP-Function Confi-ToolSet‖,choose Maunal.
Press
“
”
+
“
”
,switch to spindle 1
，
and then press
“
”
+
“
”
，
press
“
”
to move Z axis to the surface of workpiece,and then press
“
”
,system will
automatically switch to spindle 2,repeat the same operations to calculate all offsets.
After calculating all offsets
，
choose anyone of the spindles to set work origin,also press
“
”
and
“
”
to confirm work origin.System will automatically confirm the work
origin of the other spindles according the offsets.
Spindle Offset of 2
Y axis 0.000
Z axis 0.000
X axis 0.000
