RichAuto A1X Скачать руководство пользователя страница 2

Страница: 2 / 86

Beijing RichAuto S&T Co., Ltd.

Forging ahead and determined to win

Thank you for choosing the products!

This manual helps you be familiar with the company's products, and get information about

systems’ components,configuration,etc.

This manual detailed knowledge of the system characteristics,operational processes, installation,

commissioning, and safety precautions.Please read this manual carefully before using the system

and machine, which will help you use it better.

Cautions

：

Use of this product is strictly prohibited in the strong interference, strong magnetic field

environment. Operating ambient temperature 0-70

℃

, working environment humidity 0-90%

(non-condensing).

Insert U disk in the correct direction.Do not pull out 50-pin cable when system run.

During processing U disk file process, do not pull out the U disk to prevent the interruption

of data transmission.

Strictly prohibited metal, dust, and other conductive substances enter the controller.

The machine shell should connect the ground wire to ensure the safety of the work and to

prevent interference.

Prohibited unauthorized disassembly, no user-repairable parts..

Unused for long periods of time, please pay attention to the power outage, and keep properly.

Pay attention to water, dust, fire when using it.

Do not use the corrosive chemical solvents to clean the equipment.

10.

Spindle motor bearing life and its speed is inversely proportional.

11.

Graver is very sharp. Do not touch when it is running in order to avoid injury; Do not use

handkerchiefs, scarves to touch it to prevent embroiled damage.

Important Notice

：

The Company shall not be responsible for any loss caused by improper using or breaking the

correct operating procedures.

Beijing RichAuto S&T co.,Ltd owns this manual final interpretation,the company reserves

the right to modify all information in this manual, including data, technical details, etc..

Содержание A1X























































































Результаты поиска

Содержание A1X

Отзывы:

Похожие инструкции для A1X

Бренды по названию

Популярные бренды

RichAuto A1X, Руководство пользователя

Результаты поиска

Содержание A1X

Отзывы:

Похожие инструкции для A1X

Бренды по названию

Популярные бренды