Beijing RichAuto S&T Co., Ltd.
Forging ahead and determined to win 31
direction button
、
、
、
、
、
.Its motion speed is
decided by current speed mode.
NOTE
：
If uesers release the button immidiately after pressing the button(shorter than 0.5s),
machine will automatically move to the nearest grid point. It always stop on grid point when the
motion mode is over.Continous mode suitable for crude regulation of machine coordinate
situation.
2)
Step motion mode
This mode is always move in low speed, move 1 grid per 0.5 second. The grid distance is
decided by current speed mode. This motion mode is suitable for tool adjusting or precise
adjustment of the location of the mechanical coordinates.
3)
Distance motion mode
In this mode, it runs according to the setting of distance. Machine will move by the set
distance when user press direction button
、
、
、
、
、
.
NOTE
：
Grid unable to affect the distance motion mode. Machine will move by set distance,
can’t move to grid point. If user wants to change distance, please change to distance mode and
re-enter the distance value.
5.3.3
Manual testing input and output
In the initial boot interface, that is screen displays as follow:
Press ―
‖twice, the screen will displays two rows of arrows which are defaults to all
arrows are downwards ―↓‖.
Upper arrows
represent input signal: the former 4 numbers 0, 1, 2, 3 corresponding to X,Y,Z
home and tool setting signal. 4,5,6,7 corresponding to driver alarm,hard limit,E-stop and pedal
1X 0.000 MAUN
1Y 0.000 F2
1Z 0.000 L SP
Continue
