Introduction
© Rice Lake Weighing Systems
●
All Rights Reserved
7
1.10 Key Functions
Figure 1-5. SCT Weight Transmitter Display and Keys
The LEDs are activated in sequence to indicate that a setting and not a weight is being viewed.
After pressing the first digit flashes and can be edited.
For numeric entries, press to select desired digit, then press to increment the digit.
KEY
Short press in weigh mode
Long press
(3 sec) in weigh
mode
Function within Setup Menus
Escape
—
Zero Setting
Escape from a parameter or return to previous menu or operation mode.
Scroll/ Backspace
Captures Tare
Gross
Net
Removes Tare
Net
Gross
Move to the previous parameter in a level or scroll to the next digit in a
parameter value.
Next/ Data Entry
Save to alibi memory (if present) mV load cell test Move to the next parameter in a level or increment a value in a parameter.
Enter
Setting setpoints and hysteresis
—
Move to next level of configuration or select and edit a parameter.
and
Enter configuration for setting general parameters (press and hold
then press
to enter setup menu).
and
Setting preset tare (press and hold
then press
to enter setup menu.
Table 1-3. Key Definitions
Note
