Rice Lake SCT-1100, Техническое руководство

Страница: 40 / 88

36 SCT-1100 Weight Transmitter

Output configuration – Sets the function to be linked to each output
out.1 - out.6
Configurations are valid for all outputs

Output function – sets the function to be linked to each output
•

–
No function
•

–
setpoint on the Gross Weight (*)
•

–
setpoint on the Net Weight (*)
•

–
setpoint on the Weight (**)
•

–
setpoint on the Pieces (*)
•

–
Gross Weight at zero (*)
•

–
Net Weight at zero (*)
•

–
Weight at zero (**)
•

–
Instability
•

–
Pressing of the PRINT key
•

–
Pressing of the MODE key
•

–
Pressing of the C - ON/OFF key
•

–
Pressing of the ZERO key
•

–
Pressing of the TARE key
•

–
Error indication
•

–
setpoint on the Net Weight if the tare is activated(*)
Note: (*) The parameter displays only if the instrument is set as a primary instrument.
(**) The parameter displays only if the instrument is set as a secondary.

NO/NC Contacts
•

–
Output 1 normally opened
•

–
Output 2 normally closed

Switching condition
•
 –
The output is activated as soon as the weight reaches the set threshold, (independently
from the stability) and is disabled in the moment the weight goes below the set disabling threshold
•

–
The output is activated in the moment the weight, after reaching the set activation
thresholds, becomes stable and is disabled in the moment the weight goes below the set
disabling threshold, it becomes stable

Hysteresis
•
 –
Hysteresis disabled
•
 –
Hysteresis enabled

Enabling time – enter the length of time the output is enabled in seconds (4 digits with a decimal); The
output is disabled once the set time has passed, starting from the moment of the activation (see the
following parameter); By setting

the output remains always active
NOTE: The delay time is considered only if a setpoint on gross weight, setpoint on net weight or
setpoint on pieces is selected as an output function.

Enables delay period – enter the enabling delay period in seconds (4 digits with a decimal);
The output is enabled once the set time has passed, starting from the moment the condition takes
place; By setting

the output is enabled when the enabling condition takes place
NOTE: The output is enabled only if the enabling condition takes place for the length of time set.
The delay is valid only for the enabling of the output. When the enabling condition no longer takes
place the output is disabled.
In a switching condition with stability, the output is enabled only when the weight is stable.
The delay time is considered only if a setpoint on gross weight, setpoint on net weight or
setpoint on pieces is selected as an output function.

Setpoint sign – The parameter displays only if a setpoint on net weight or setpoint on pieces is
selected as an output function
•

– Functioning on positive weight
•

– Functioning on negative weight

Analog output – see Table 4-6 on page 37

Default settings – Restores the instrument to default settings; Press .

displays. Press again to
confirm or exit by pressing any other key
NOTE: Returning the instrument to default settings cancels the present calibration.
Parameter Settings Description
Table 4-5. Setup Parameters (Continued)