Rice Lake SCT-1100, Техническое руководство

Страница: 18 / 88

14 SCT-1100 Weight Transmitter
Tare Function Limitations
It is possible to limit the tare functions by setting  in the step    . See Table 4-5 on page 35 . The
tare operations will have the following specifications:
3.3 Auto Power Off
The instrument can be set to turn off by setting a time of non-use (1 to 255 minutes). The auto power off occurs
when the scale is unloaded and the weight has not changed or a key has not been pressed for the set amount of time.
The blinking message  displays and then instrument turns off.
To set the auto off function:
1. Turn on the instrument and press while the firmware version displays.  displays.
2. Press to enter the menu.
3. Press or until  displays. Press to enter the menu.
4. Press or t o scroll through the options.
•  – disabled
•  – enabled
5. Press to confirm. If  is selected, a prompt displays to enter the number of minutes after which
the instrument shuts off.
6. Enter a number between 1 and 255 using to select the digit to be modified and or to increase or
decrease the digit.
7. Press to confirm once the desired value is entered.
8. Slowly press multiple times until  displays.
• Press to confirm and store to the instrument memory
• Press any other key to cancel and exit without saving
Scale
Capacity Function
      
(no remote display for the visualization of the tare)







(remote display for the visualization of the tare)
<220 lb All tare functions are disabled • The SEMIAUTOMATIC TARE value cannot be modified
with a manual tare
• The manual tare can be entered or modified only with an
UNLOADED scale and tare equal to zero
• It is possible to cancel the tare value only with an
UNLOADED scale, by pressing or by entering a
manual tare equal to zero
≥
220 lb
• The SEMIAUTOMATIC TARE value cannot be
modified with a manual tare
• The manual tare can be entered or modified only
with an UNLOADED scale and tare equal to zero
• It is possible to cancel the tare value only with an
UNLOADED scale, by pressing or by entering
a manual tare equal to zero
• The SEMIAUTOMATIC TARE value cannot be modified
with a manual tare
• The manual tare can be entered or modified only with an
UNLOADED scale and tare equal to zero
• It is possible to cancel the tare value only with an
UNLOADED scale, by pressing or by entering a
manual tare equal to zero
Table 3-1. Tare Function Limitation
C