Rice Lake SCT-1100, Техническое руководство

Страница: 20 / 88

16 SCT-1100 Weight Transmitter
3.7 Printing
The following weight data can be programmed to print to a connected printer. See Section 6.11 on page 71 .
• 4 heading lines of 24 characters
• Gross weight
• Tare weight
• Net weight
• Ticket number
• Date and time (optional)
• A Code 39 barcode (with compatible printer)
In addition each single functioning mode has specific printouts, which are described in the various operating
modes. See Section 3.10 on page 18 .
Weight data can also be sent to a PC, with a standard or extended string, via the printer port ( 
/

or

/

/
 in  parameter. See Section 6.5 on page 63 .).
The following conditions must be met to print:
• the weight must be stable
• gross weight must be greater than or equal to 0
• printout always active
To print the totaled weight in a totalizer mode:
• the weight must be stable
• the net weight must be greater than or equal to a division, with normal or fast totalization
• the net weight must be greater than or equal to 10 divisions, with automatic totalization
Printing is reactivated depending on how the

parameter has been set in the setup mode. See Section 3.7.2 on
page 17 .
3.7.1 Printouts
If the printer is on the secondary instrument:
• The printer must be selected in both the primary instrument and the secondary instrument in the
       parameter. See Section 4.2 on page 32
.
• Press the dedicated key on the primary or secondary instrument (depending on the selected function of the
primary instrument) to print the configured printouts in the active primary instrument. To configure print
formats see section Section 6.11 on page 71 .
• Press when the sum displays to execute a printout of all detected scale weights, their sum and the
heading programmed in the secondary instrument. To configure a print format see section Section 6.11 on
page 71 .
To execute a printout from a primary instrument,
t
he printer must be selected in the primary instrument
       parameter. See Section 4.2 on page 32
.
The printer does not need to be
selected in the secondary instrument.
Printing cannot be performed if a printer has been selected in the secondary instrument, but not in the primary
instrument.
If more than one primary instrument is present, the number of the primary instrument from which the weight is
taken is added to each printout on the secondary instrument.
The header is inserted by the primary instrument, if enabled.
The primary instrument adds the ticket number and time and date, if enabled.
Note